How to Increase an LVM Partition in Linux:
Here we show you how to expand an LVM volume or partition in Linux by first resizing logical volume followed by resizing the file system to take advantage of the additional space.
See here if you’re instead trying to do the opposite and shrink an LVM volume.
Note: In this example we are working in CentOS 7, some commands may differ in different Linux distributions.
In this example we will work through expanding logical volume /var/centos/var from 5GB to 10GB. We currently have this logical volume mounted to /mnt.
Overview of Logical Volume Manager (LVM)
Before working through the resizing process it’s important you first understand some basic concepts around physical volumes, volume groups, logical volumes, and the file system.
- Physical Volume (PV): This can be created on a whole physical disk (think /dev/sda) or a Linux partition.
- Volume Group (VG): This is made up of at least one or more physical volumes.
- Logical Volume (LV): This is sometimes referred to as the partition, it sits within a volume group and has a file system written to it.
- File System: A file system such as ext4 will be on the logical volume.
LVM Resize – How to increase or expand the logical volume
This process is extremely easy to do with LVM as it can be done on the fly with no downtime needed, you can perform it on a mounted volume without interruption. In order to increase the size of a logical volume, the volume group that it is in must have free space available.
To view the free space of your volume group, run vgdisplay command as shown below and look at the “Free PE / Size” field.
[root@CentOS7 ~]# vgdisplay --- Volume group --- VG Name centos System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 6 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 20.74 GiB PE Size 4.00 MiB Total PE 5309 Alloc PE / Size 4030 / 15.74 GiB Free PE / Size 1280 / 5.00 GiB VG UUID VvG6Sp-wIgb-LTh0-szdU-s9R1-a6K9-qHassI
In this example we have 5GB of free space in the volume group, as shown by “Free PE / Size 1279 / 5.00 GiB”.
Now that we have confirmed there is space free within the volume group, confirm the name of the logical volume you want to increase as well as how much space you plan on adding. The below lvdisplay command will show all logical volumes and their current size. It will also show the volume group that the logical volume is a member of, so ensure that the correct volume group has been checked for enough space with vgdisplay as previously mentioned to prevent trying to increase a logical volume that is inside some other volume group.
As shown in the example below, we are going to be working with the logical volume “var” which is in volume group “centos”, the volume group we saw in vgdisplay. In this example we only have just the one volume group, but you may have more so you need to check.
[root@CentOS7 ~]# lvdisplay --- Logical volume --- LV Path /dev/centos/var LV Name var VG Name centos LV UUID 7PNgg2-ZmnG-a26g-zRoT-PRVM-RDc1-oq6J4M LV Write Access read/write LV Creation host, time CentOS7, 2015-04-16 07:50:25 +1000 LV Status available # open 0 LV Size 5.00 GiB Current LE 1280 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2
Now it’s time to expand the logical volume. In the below example we are using the -L flag to increase by a size specified (M for Megabytes, G for Gigabytes, T for Terabytes). You can alternatively remove the + to increase to the amount specified rather than by the amount specified.
lvextend -L+5G /dev/centos/var Rounding size to boundary between physical extents: 4.90 GiB Size of logical volume centos/var changed from 5.00 GiB (1280 extents) to 10.00 GiB (2560 extents). Logical volume var successfully resized
The above command will increase the logical volume /dev/centos/var by 5GB, currently it is already 5GB so this will increase it to a total of 10GB. You could achieve the same with “lvextend -L 10G /dev/centos/var” which will increase the logical volume to 10GB as well, as this is what was specified with no +. Alternatively if you instead want to just use all free space in the volume group rather than specifying a size to increase to, run “lvextend -l +100%FREE /dev/centos/var”.
We can run the below lvdisplay command shown below to check that the extend completed as expected.
[root@CentOS7 ~]# vgdisplay --- Logical volume --- LV Path /dev/centos/var LV Name var VG Name centos LV UUID 7PNgg2-ZmnG-a26g-zRoT-PRVM-RDc1-oq6J4M LV Write Access read/write LV Creation host, time CentOS7, 2015-04-16 07:50:25 +1000 LV Status available # open 0 LV Size 10.00 GiB Current LE 2560 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:2
Now that the logical volume has been extended, we can resize the file system. This will extend the file system so that it takes up the newly created space inside the logical volume. The command may differ depending on the type of file system you are using.
Use this for ext3/4 based file systems
Alternatively, use this for xfs based file systems
After the file system has been resized the space should be ready to use. If you run a ‘df’ command to view the disk space you should see that it’s been increased successfully.
[root@CentOS7 mnt]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/centos-root 9.8G 1.4G 8.5G 14% / devtmpfs 908M 0 908M 0% /dev tmpfs 914M 0 914M 0% /dev/shm tmpfs 914M 8.6M 905M 1% /run tmpfs 914M 0 914M 0% /sys/fs/cgroup /dev/sda1 497M 96M 402M 20% /boot /dev/mapper/centos-var 10G 33M 10G 1% /mnt
In this example I have run a ‘mount /dev/centos/var /mnt’ to mount the logical volume to /mnt, as shown above /mnt is correctly reporting a size of 10G.
We have now successfully expanded a file system and corresponding LVM logical volume without any down time. This was done by first expanding the logical volume, and then performing an on-line resize of the file system.
Was this Tutorial helpful? Help others share on Facebook, Twitter, and Google Plus!